Freud SD508 8" Super DadoSet
Price: $169.99
Freud Industrial DadoSets offer all the quality that fine cabinetmakers
have come to expect from Freud. Micrograin carbide tips thick enough
for several sharpenings and tri-metal brazing for impact resistance
insure the longest life.
Big Horn 10225 3-Piece FeatherboardSet
List Price: $19.95
It helps guide your workpiece and holds the wood against the fence for better cutting. The two locking knobs keep your workpiece aligned for straight cuts and fit most standard miter slots.
Freud SD408 8" Safety
DadoSet- 40 tooth
ListPrice:$231.79
Thick micrograin carbide tips
Kickback reducing design
Produce dadogrooves from 1/4 to 13/16 inch in 1/16
inch increments
Hinge Mate
HingeMate HM-1100W Door Hinge Template II
Price: $119.99
Accurately set hinges in minutes. Use for doors, strike plates, boxes, or other edge routing projects. For hinges 1 in - 5 in. long on stock up to 1-3/4 in. thick
Freud SD508 8" Super
Thick micrograin carbide tips
Kickback reducing design
Chip-free, flat-bottom cuts in plywood and laminates
Includes storage case and shim set
# Supports work right up to the blade
# Reduces chip-out and splintering
# Reduces sawdust expelled from tabletop and reduces saw noise
# Kerf serves as handy stock alignment guide
Jet Xacta Saw
JET 708663PK /
JTAS-10XL50-W1 3 HP,
10" XactaSaw, Left Tilt
with 50" XactaFence
Leecraft JT-2L Zero
Clearance Table Saw
Insert (For Jet XactaSaw
Left Tilt)
Delta 34-264 8" DadoInsert for
Contractor's and Right-TiltUnisaws
Use in place of standard
insert to accommodate a 7-
or 8-inch dadoset
Dado Insert
Delta 34-672 DadoHead
Table Insert for 10" Table
Saw
JET 708109 8" DadoInsert
for Left Tilt Saw
Dadoinsert (left tilt)
Reduces virtually all splintering and tearout on dadocuts
Made from high density phenolic laminate
DeWalt DW7444 DadoThroat Plate (for DW744)
Jet 708111 Tenoning Jig
List Price: $119.99
This Tenoning Jig from JET fits left- or right-tilt saws with 3/8- and
3/4-inch miter gauge grooves. It holds the board on the end to simplify cutting tenons
and has fully adjustable stops that help secure stock when cutting angled mortises.
Jet Xacta Saw
JET 708663PK /
JTAS-10XL50-W1 3 HP,
10" XactaSaw, Left Tilt
with 50" XactaFence
Leecraft JT-2L Zero
Clearance Table Saw
Insert (For Jet XactaSaw
Left Tilt)
Delta 34-264 8" DadoInsert for
Contractor's and Right-TiltUnisaws
Use in place of standard
insert to accommodate a 7-
or 8-inch dadoset
unifence Delta 36-905 30"
Price: $269.99
Fits Delta 10-inch tablesaws and a variety by other
manufacturers
Unique locking system allows faster adjusting of the fence
Fence body can be retracted and used as a stop for
repetitive cut off work
Fence body can also be flipped on its side to for cutting
laminated materials
Provides a 30-inch cutting capacity
Black and Decker NS118 18.0V Cordless Broom
Delta 35-535 
Forrest DK06244 
Freud SD508
Big Horn 10225 
Freud SD308 
Freud
HingeMate
Freud 
Freud SD208 
Leecraft DL-1U Zero Clearance Table Saw Insert
JET 
Leecraft 
Delta 
JET
DeWalt
Delta 50-355
unifence